If you are uncomfortable using a laptop on the couch or bed, learn how to make a wooden foldable laptop stand with this step-by-step tutorial for beginners. It will raise the laptop, and since foldable, you can increase or decrease the angle until your hands and back are comfortable. To satisfy you more, there will also be 10 more DIY wooden foldable stand ideas for beginners and experts alike. So, to enjoy a good posture while working, keep reading this guide and list.
Making Wooden Foldable Stand for a Laptop
This easy laptop project needs a little woodworking skills. Below are the detailed instructions for how to make a wooden foldable laptop stand tutorial:
Materials & Tools Needed
Below is the list of all materials you will need for the foldable laptop stand:
- Wooden Boards
- Wooden Bars
- Wood Glue
- Mid-clamps with holes on the sides only
- Electric Drill
- Screws
- Screwdriver
- Sandpaper
- Saw
1. Marking Pieces (For Legs & Stand)
You will need a rotatable rectangular platform (for the laptop) that fits between two legs. Mark them on the wooden board with a pencil.
Each leg will be a triangle (30cm long and 8cm high), having corners a little raised (3.5 cm high). The rectangle is 29 cm long and 10 cm high with rounded corners. You can set the measurements according to your laptop.
Mark both precisely with a ruler, and both legs should be identical.
2. Cutting Pieces
Using a table saw or jigsaw (here used an orbital jigsaw), carefully cut all the marked pieces for the arms and platform according to the measurements and two small cubic bars (too!). We need these bars to attach with the mid-clamps (the rotators).
3. Sanding Pieces
Sanding is crucial for smooth edges and a polished look. Sand all the cut pieces, whether on the sanding wheel or using sandpaper, ensuring they are void of splinters.
4. Attaching Mid Clamps
Now take each mid-clamp and screw it from both sides on the cubic bar. Then, temporarily attach both on each side (left and right) of the platform by brushing the wood glue at the bottom cube with clamps.
5. Securing Mid Clamps
There will be a hole in the center of the mid-clamp. Assume its position on the back of the platform and drill a hole. Then screw the mid-clamps permanently.
6. Attaching Front Bar
We must attach the main bar (length equal to the platform's) to complete the stand frame. For this, mark the area at the 90-degree corner of each leg. Then, drill two holes at the marked area and then screw the legs with both ends of that front bar as in the pictures:
7. Making Hole On Legs
Drill holes on each leg near the front bar at the center line to attach the rotatable stand between legs.
8. Attach Rotating Platform
Invert the whole frame and place that platform between and secure mid-clamps with hand rotatable screws.
It is finished
Now, you can erect the whole stand to check if the platform is rotatable or not.
Check the video tutorial of the idea by MB Maker.
More DIY Laptop Stand Ideas
These 10 more DIY laptop stand ideas will provide you with guides to create many more types of laptop stand using different materials and techniques:
Laptop Stand For Bed
This DIY laptop stands for bed and was designed to be cheap, completely adjustable, and easy to build. They're great for using in bed while typing, browsing the web, or most especially watching movies! The stand can go to virtually any height, from sitting entirely on the bed up to standing while leaning against the wall. The arms are angled slightly inwards so that this laptop sits propped up ¼ inch (this can be adjusted in the cut list).
Everything is made from wood: as few cuts as possible, screws are held together by wood wedges instead of glue so they can be easily disassembled if needed. The simple and elegant design works great in bed, by the desk, or anywhere else you want it. It can be built with materials you probably already have, and it will only cost around $15-20 and will hardly take you 30 minutes for its completion.
Metallic Laptop Stand
Looking for a really comfy and functional DIY Laptop Stand Ideas? Because placing your computer on your lap or a desk can overheat the laptop. Encourage proper posture with this cool DIY project. This steel laptop stand gives your computer an elevated perch and a comfortable typing angle. This also keeps the laptop off the surface, giving excellent air circulation that will keep the computer cool while you work. It even matches your laptop's color scheme, so it will complement any decor.
It even matches your laptop! This DIY Metallic Laptop Stand will transform any standard laptop into a stylish and functional presentation tool, all for under $10. The quick and easy DIY project keeps the computer off the surface, gives excellent air circulation, and elevates it to a comfortable typing angle.
Laptop Stand With Wood
If you have a white or black desk and want to spruce it up a little, this DIY laptop stand would be the perfect addition. This wooden laptop stand uses the Rose Gold Aluminum Legs by ELOO and a white top for more versatility! It is the perfect way to prop up your laptop and make your desktop look great. Let your laptop work as a desktop with this DIY laptop stand. It's easy to put together, using all wood parts with simple mortise and tenon joints.
You can choose whatever species of wood or finish that you'd like! This particular one was made with oak, gold metal-finished legs, and a white tabletop. With just a few tools and some basic skills, you can make your own laptop stand to match any decor or tabletop. This stand has an oak top, faux metal legs, and raw steel bolts. Easily customize your very own laptop stand. Using the cutting list, you can cut to size using whatever species of wood you like.
Laptop Stand For Desk Using Scrap Wood
If you have a table or desk that your laptop doesn't fit underneath, you can make this DIY laptop stand for a desk using scrap wood in minutes. Not only will your back and neck thank you, but it's also a great way to use some scrap wood around the house in an easy-to-make project. Use it as a gift or a backup laptop stand in case you aren't near someone you can use your other stand with. A simple DIY laptop that stands for a desk using scrap wood is the solution you've been looking for.
With this easy-to-follow free tutorial, you'll be able to get some much-needed relief from slouching over a computer. This DIY laptop stands for a desk is perfect for those looking to raise their laptop up off of their uncomfortable hard desk surface. It conveniently works on any desk space, whether big or small. The best part? It's affordable and can be made out of scrap wood you have to lie around your garage or from a local hardware store! You'll be able to have this simple DIY done in no time with this tutorial.
Laptop Or Monitor Stand
Stay productive with the DIY Laptop or Monitor Stand! Whether writing an essay, designing a presentation, or browsing the web, elevate your computer screen to eye level with this DIY laptop or monitor stand. It includes storage for pens and pencils, shelves for your notebooks and an external keyboard—so it doubles as a multi-purpose desktop organizer. Go on - elevate your workspace today!
This DIY laptop or monitor stand will make working at your desk more comfortable and ergonomic. Elevate your computer screen to eye level with the adjustable tray, or use it to hold a shelf for notebooks, pens, and pencils. Two side shelves can hold an external keyboard or your lunch. The base is made of unfinished metal so you can customize it with paint or any other surface.
Folding Laptop Desk
Tired of your neck hurting while you're on your laptop? This is a really low-cost and easy project. This folding laptop desk allows you to work comfortably while protecting your back and preventing neck strain. It folds down for easy storage and is so light you can take it anywhere.? Many people suffer from neck and back pain while they work.
This DIY folding laptop desk can help alleviate that pain. The table raises your screen so you will not have to look down as much – this relieves the stress on your neck and back and will really improve your sitting posture. (makes a great gift for a college student). An innovative laptop desk will ease neck pain, elevate your laptop screen, add more workspace, and eliminate clutter.
Laptop Bubble Stand
Bubble wrap is an extremely energy-efficient method of transferring heat from one place to another. Bubble wrap is given a convex shape by heat and then, when allowed to cool, forms into a concave bubble. This bounce causes the bubble to act like a spring that can quickly transfer its heated state to another surface. Constructing your own laptop stand out of bubble wrap will help keep your lap cool, whether you're using it at your desk or on the couch. The best part is that not only is it cheap, but it's also dead easy to make."
DIY Laptop Bubble Stand will not only keep your laptop cool but also looks sleek and stylish. The best part is that it can be made for under $10, so it's both cheap and easy to make. You will have your own portable DIY laptop stand with an acrylic sheet, Some plywood scrap, A laser cutter, and a few basic tools. So what are you waiting for? Let's begin!
Pvc Laptop Stand
This laptop stand is so easy you could make it yourself. It's a great way to save desk space if you have a laptop or netbook computer, and it's also great for saving your neck and back. This stand is very sturdy, considering the meager materials used to build it - less than $5 bucks to make. The DIY PVC Laptop Stand can be assembled in under a minute and is an effective and inexpensive tool to elevate your laptop to a more ergonomically friendly setup.
It can easily be adapted with different tilting angles cable routing options. And even color schemes for a non-trivial DIY project. It has a couple of main benefits. The first is similar to what a lot of people want from a laptop stand. It raises your screen high enough so you don't have to hunch over your desk. Second, it provides cable routing for your power cable and for your headphones or speakers. This way, your desk isn't cluttered with cables.
You can also see: DIY Headphone Stand Ideas
Laptop Stand For Bed
You're tired of banging your laptop up against your chest while you type from bed. This idea is to make a DIY laptop stand for bed so you can have an angled, flat surface to type on. This handy laptop stand folds out to make typing in bed much more comfortable. It's also great for using a laptop on the couch. It is also good that you'd rather not have your computer while you're on the back of a chair or anywhere else.
Can't touch-type on a laptop? Use this DIY laptop stand for the bed to type comfortably in bed. It's no secret that typing in bed is bad for you. It's hard on your wrists and can be downright uncomfortable. Instead of opting for a laptop desk, which takes up valuable space, try doing a quick IKEA hack using a spare drawer as an adjustable laptop stand. This cool little trick gives you a comfy, flat surface to type on in bed.
Foldable Laptop Stand
The concept behind this DIY laptop stand is very simple. It is an augmentation of a foldable ruler, which also makes it one of the most useful. Just put your laptop on it and go to work. No need for any preparation whatsoever! It is extremely useful to prevent your laptop screen from getting damaged and keep it cool with good ventilation. It’s also easy to carry as it folds flat. This Laptop stand is ideal for use in the conference hall, home, office, etc. You can also fold it up and carry it around easily. All you need is a few wooden ruler pieces, hinges, and a few screws.
